Good News For Medusa Box v.2.4.3 - more LG models added for USB repair! New Post

Medusa Box v.2.4.3 is out!


We have added boot repair via USB and small TP for:
LG E980, E980H, LG E985T, E986, LG E988, LG E989,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!

Also added repair via JTAG interface for:
Gigabyte GSmart G1317D

Medusa Box v.2.4.3 Release Notes:

- Added support for the following models:

• LG E980 - added Dead Boot / Device Repair via USB
• LG E980H - added Dead Boot Repair via USB
• LG E985T - added Dead Boot Repair via USB
• LG E986 - added Dead Boot Repair via USB
• LG E988 - added Dead Boot Repair via USB
• LG E989 - added Dead Boot Repair via USB
• Gigabyte GSmart G1317D - added Dead Boot Repair (thanks to Mr. Dr_Wolodya).

- All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.4.3

 http://medusabox.com/eng/help/download