SuCCESfull Riff Huawei E5832 MODEM Mifi
Posted in
No comments
Tuesday 17 November 2015 By Unknown
12/22/2012 11:59:23 AM] Open serial port...OK
[12/22/2012 11:59:23 AM] Connecting to the RIFF Box...OK
[12/22/2012 11:59:23 AM] Firmware Version: 1.34, JTAG Manager Version: 1.48
[12/22/2012 11:59:23 AM] Selected Resurrector: [USB Modem E5832 V1.0.4711.50631]
[12/22/2012 11:59:23 AM]
[12/22/2012 11:59:23 AM] Connecting to the dead body...OK
[12/22/2012 11:59:23 AM] Detected dead body ID: 0xC01B00E1 - CORRECT!
[12/22/2012 11:59:23 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
[12/22/2012 11:59:23 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[12/22/2012 11:59:23 AM] Settings Code: 0x27010000000000000000000008000000
[12/22/2012 11:59:23 AM]
[12/22/2012 11:59:23 AM] Resurrection sequence started.
[12/22/2012 11:59:23 AM] Establish communication with the phone...OK
[12/22/2012 11:59:23 AM] Initializing internal hardware configuration...OK
[12/22/2012 11:59:23 AM] Uploading resurrector data into memory...OK
[12/22/2012 11:59:23 AM] Starting communication with resurrector...OK
[12/22/2012 11:59:23 AM]
[12/22/2012 11:59:23 AM] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x15A1 (128MB)
[12/22/2012 11:59:23 AM]
[12/22/2012 11:59:23 AM] Reading FLASH1 address space from 0x000000000000 to 0x000007FFFFFF
[12/22/2012 11:59:23 AM] Completed in 00:05:47.367 (Average Transfer Rate: 389.12 kB/s)
[12/22/2012 11:59:23 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY]
[12/22/2012 11:59:31 AM] [START OPERATION_ID = 23]
[12/22/2012 11:59:52 AM] Please wait, saving data...OK
[12/22/2012 11:59:52 AM] Saved to File: C:\Users\Xenzo\Desktop\E3852 FULLDUMP UNLOCK.bin
[12/22/2012 11:59:52 AM] Completed in 00:00:01.420 (Average Transfer Rate: 95188.73 kB/s)
[12/22/2012 11:59:23 AM] Connecting to the RIFF Box...OK
[12/22/2012 11:59:23 AM] Firmware Version: 1.34, JTAG Manager Version: 1.48
[12/22/2012 11:59:23 AM] Selected Resurrector: [USB Modem E5832 V1.0.4711.50631]
[12/22/2012 11:59:23 AM]
[12/22/2012 11:59:23 AM] Connecting to the dead body...OK
[12/22/2012 11:59:23 AM] Detected dead body ID: 0xC01B00E1 - CORRECT!
[12/22/2012 11:59:23 AM] Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
[12/22/2012 11:59:23 AM] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[12/22/2012 11:59:23 AM] Settings Code: 0x27010000000000000000000008000000
[12/22/2012 11:59:23 AM]
[12/22/2012 11:59:23 AM] Resurrection sequence started.
[12/22/2012 11:59:23 AM] Establish communication with the phone...OK
[12/22/2012 11:59:23 AM] Initializing internal hardware configuration...OK
[12/22/2012 11:59:23 AM] Uploading resurrector data into memory...OK
[12/22/2012 11:59:23 AM] Starting communication with resurrector...OK
[12/22/2012 11:59:23 AM]
[12/22/2012 11:59:23 AM] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x15A1 (128MB)
[12/22/2012 11:59:23 AM]
[12/22/2012 11:59:23 AM] Reading FLASH1 address space from 0x000000000000 to 0x000007FFFFFF
[12/22/2012 11:59:23 AM] Completed in 00:05:47.367 (Average Transfer Rate: 389.12 kB/s)
[12/22/2012 11:59:23 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY]
[12/22/2012 11:59:31 AM] [START OPERATION_ID = 23]
[12/22/2012 11:59:52 AM] Please wait, saving data...OK
[12/22/2012 11:59:52 AM] Saved to File: C:\Users\Xenzo\Desktop\E3852 FULLDUMP UNLOCK.bin
[12/22/2012 11:59:52 AM] Completed in 00:00:01.420 (Average Transfer Rate: 95188.73 kB/s)
Related posts
Share this post
0 comments: