2015 new post How To Restore and Jailbreak This Guide is For iPhone 3G Download RedSn0w from here
Posted in
No comments
Sunday, 22 February 2015 By Unknown
How To Restore and Jailbreak This Guide is For iPhone 3G
These are instructions on how to Restore And jailbreak your iPhone 3G on the 4.2.1 With Custom Firmware (if You Already Have 6.15 Baseband)
IMPORTANT FOR UNLOCKERS
During this process you can update your baseband to the 06.15 version. If you are on 05.14 or 05.15 or higher you will need to do this to unlock. You do not need to do this for jailbreak only. Please read the following very carefully before deciding whether to do this.
1-Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail). You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).
2-There are reports that 06.15 may disable your GPS. The iPhone Dev-Team is currently working on a fix.
Don’t update to 06.15 if you don’t need to! Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks.
Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 4.2.1 firmware from below and place it in the same folder.
4.2.1 (3G): iPhone1,2_4.2.1_8C148_Restore.ipsw
1-Open Redsn0w And Select The Official Firmware, Then Deselect ALL Options And Only Check “Just Enter Pwned DFU Mode Right Now”
2-Once Finished, Open iTunes And Hold Shift Or Option On Mac And Left Click Restore In iTunes, Then Select The 4.2.1 Custom Restore File For 3G.
To Make Custom Restore File You Will Need Sn0wBreeze
1- Open Sn0wbreeze And Select IPSW 4.2.1
2- Select Expert Mode And Then General And Select "Activate The iPhone [Hacktivate]
Springboard Modifications is OPTIONAL if You Need it
3-if You Need Custom Firmware With 6.15 in one IPSW Select install 6.15 iPad BaseBand
4-Custom Boot Logos is Optional Too
5- if You Need To Add DEB Files Like Ultrasn0w Select Browse and Select .DEB Files
6-Press Next and Select Build IPSW And Wait Till It Finish [CFW Should be on Your Desktop After Sn0wbreeze is Done]
After Restore With CFW Phone Should be Activated And Waiting For unlock
For More info About This Guide Please Use This Video iPhone 3G How To Restore With Custom Firmware For Newbies [Gsmhosting] - YouTube
Follow This Thread iPhone Tutorials Videos For Newbies [Youtube-Dailymotion]
These are instructions on how to Restore And jailbreak your iPhone 3G on the 4.2.1 With Custom Firmware (if You Already Have 6.15 Baseband)
IMPORTANT FOR UNLOCKERS
During this process you can update your baseband to the 06.15 version. If you are on 05.14 or 05.15 or higher you will need to do this to unlock. You do not need to do this for jailbreak only. Please read the following very carefully before deciding whether to do this.
1-Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail). You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).
2-There are reports that 06.15 may disable your GPS. The iPhone Dev-Team is currently working on a fix.
Don’t update to 06.15 if you don’t need to! Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks.
iPhone 3G
Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 4.2.1 firmware from below and place it in the same folder.
4.2.1 (3G): iPhone1,2_4.2.1_8C148_Restore.ipsw
1-Open Redsn0w And Select The Official Firmware, Then Deselect ALL Options And Only Check “Just Enter Pwned DFU Mode Right Now”
2-Once Finished, Open iTunes And Hold Shift Or Option On Mac And Left Click Restore In iTunes, Then Select The 4.2.1 Custom Restore File For 3G.
To Make Custom Restore File You Will Need Sn0wBreeze
1- Open Sn0wbreeze And Select IPSW 4.2.1
2- Select Expert Mode And Then General And Select "Activate The iPhone [Hacktivate]
Springboard Modifications is OPTIONAL if You Need it
3-if You Need Custom Firmware With 6.15 in one IPSW Select install 6.15 iPad BaseBand
4-Custom Boot Logos is Optional Too
5- if You Need To Add DEB Files Like Ultrasn0w Select Browse and Select .DEB Files
6-Press Next and Select Build IPSW And Wait Till It Finish [CFW Should be on Your Desktop After Sn0wbreeze is Done]
After Restore With CFW Phone Should be Activated And Waiting For unlock
For More info About This Guide Please Use This Video iPhone 3G How To Restore With Custom Firmware For Newbies [Gsmhosting] - YouTube
Follow This Thread iPhone Tutorials Videos For Newbies [Youtube-Dailymotion]
Related posts
Share this post
0 comments: